RAP-B-379-HA1U RAM Mounts Mirror Post Base for Harley-Davidson Motorcycles
RAM Mounts 793442941924
Description: The RAP-B-379-HA1U consists of a 1/4"-20 X .25" thread, connected to a 1" diameter ball, female blind barrel nut and nylon washer.
Features:
1. Base can be mounted above or below mirror holes
2. Rubber ball dampens shock and vibration
3. High strength materials ensure product longevity
4. Lifetime warranty
5. Made in U.S.A.
Compatible Harley-Davidson Motorcycles
2013 Models
CVO Road Glide Custom
CVO Road King
Electra Glide Classic
Electra Glide Ultra Limited
Road Glide Custom
Road Glide Ultra
Road King Classic
Road King
Street Glide
Tri Glide Ultra Classic
Ultra Classic Electra Glide
2012 Models
CVO Road Glide Custom
CVO Street Glide
Electra Glide Classic
Electra Glide Ultra Limited
Road Glide Custom
Road Glide Ultra
Road King Classic
Road King
Street Glide
Tri Glide Ultra Classic
Ultra Classic Electra Glide
2011 Models
CVO Road Glide Ultra
CVO Street Glide
Electra Glide Classic
Electra Glide Ultra Limited
Road Glide Custom Road Glide Ultra
Road King Classic
Road King
Street Glide Trike
Street Glide
Tri Glide Ultra Classic
Ultra Classic Electra Glide
2010 Models
CVO Street Glide
CVO Ultra Classic
Electra Glide Classic
Electra Glide Ultra Limited
Road Glide Custom
Road King
Road King Classic
Street Glide
Street Glide Trike
Tri Glide Ultra Classic
Ultra Classic Electra Glide
2009 Models
CVO Road Glide
CVO Ultra Classic Electra Glide
Electra Glide Classic
Electra Glide Standard
Road Glide
Road King
Road King Classic
Street Glide
Tri Glide Ultra Classic
Ultra Classic Electra Glide
2008 Models
CVO Road King
CVO Ultra Classic Electra Glide
Electra Glide Classic
Electra Glide Standard
Road Glide
Road King
Road King Classic
Street Glide
Ultra Classic Electra Glide
Material:
High Strength Composite & Steel
Ball Size:
1" Rubber Ball "B" Size
Installation Instructions:
1. Locate fairing mirror holes.
2. Place the nylon washer over the barrel nut. Insert the barrel nut into the hole on the controls.
3. Screw the threaded ball into the barrel nut from the other side of the hole. Tighten with 5/8" and 1/2" wrench.
Note: The "U" in the part number reflects product packaged in poly bag. The RAP-B-379-HA1U is not compatible with Harley-Davidson motorcycles that are equipped with a hydraulic clutch.
SPECIAL NOTE: PLEASE CHECK THE RAM-MOUNTS WEBSITE TO ENSURE COMPATIBILITY WITH YOUR MOTORCYCLE BEFORE PURCHASING. NO REFUNDS FOR WRONG ITEM PURCHASED.
